1.Make sure the temperature is between 70° and 100°F (21° and 38°C)
2. Make sure the surface is flat, hard and dry before intalling.
3.Do not reuse the double sided adhesive after removing it.
Multi Purpose Application
The below rules you have to follow to get it working longer.
a) Make sure the surface at least as the room temperature or a little higher
b)Clean the surface with alcohol pad until dry
c)Peel off the yellow paper and stick it to the mount/popsocket
d) Press firmly for 12 seconds
e)Then peel off the red paper, and also press firmly for 12 seconds
f)Wait 24 hours to use after installation
6* 1.35inch for Pop Socket Sticky Adhesive
2* 0.9inch for Pop Socket Car Mount Adhesive
2* alcohol pad
1* instruction manual
[8 Pack Double-sided sticky pads for Pop Socket & Mount, Phone grip,etc ] Included 1.35 inch and 0.9 inch Double-sided sticky pads, which is proved to be the perfect size for pop socket, phone grip,finger ring holder, VAVA magnetic phone car mount. Also works for dash cam mount.
[Stick well on different material, even fabric] it can stick to anywhere there is a flat, hard and dry surface, like a Otterbox case, a lifeproof case, a case made of fabric, faux leather, PC, tempered glass, silicon or rubber, fiberglass, glass windshield,car dashboard, locker, mirror, refrigerator, bed post, wall and ect.
[Extra Strong & Durability， Hold 53oz For 11 Years] 3M VHB is made of polyacrylate, whose main chain is C-C bond.After testing, that makes it can hold anything with 53oz for 11 years, between 70° F and 100°F.
[Easily install] With 2pcs alcohol pads, remove the old adhesive without difficulty and residue. And with the special design of the adhesive paper, it is easy to peel off both sides.
[Strong But Thin] Only 1mm thickness makes it nearly invisible. With black strong 3M VHB, the tape is very sticky and lasts very long.