Rating:

iPhone 6 Screen Replacement LCD Display – 2018 4.7 inch Touch Screen Digitizer Frame Assembly Full Set Repair Guide

Amazon.com Price: $19.99 (as of 18/01/2020 11:14 PST- Details)

Only fit for iPhone 6 4.7inch A1549, A1586, A1589, Not compatible with any other models
Should transfer home button with fingerprint sensor, front camera, ear speaker and silver metal plate from your old phone
The screen including: brackets for the camera + the plastic pieces for the sensors + blue tab remove to expose the adhesive. It allow no need to be moved from your old screen over

SHOP NOW

Only fit for iPhone 6 4.7inch
Note:
The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen
So total four flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.
Disassembling
1.When disassembling your iPhone6, please don’t just pull the screen out directly.The ribbon cable of the “Home” button is connected to the screen.
It is very flimsy You should open up thescreen a little,disassemble the ribbon cable and then get the screen out.
2.When install the screw of the camera, please notice that the long screw must be at the top left corner, or it will damage the LCD screen.
3.If the phone is deformed, it is easy to get stuck when installing, please do not press down directly, it’s easy to burst the screen, you should press it downward by flat pushing.
4.The screen belongs to fragile items, so please be careful when you install it in case it break.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone 6 IOS is upgraded to the latest version.

Package Include:
1* LCD Screen for iPhone 6 4.7inch
1* Phone Ring Stand
1* Set Repair Tool Kits
1* Retail Box
1* Instruction
1*Nano Protective Film
Compatible for these versions: A1586/A1549/A1589.
Only fit for iPhone 6 4.7inch A1549, A1586, A1589, Not compatible with any other models
Should transfer home button with fingerprint sensor, front camera, ear speaker and silver metal plate from your old phone
The screen including: brackets for the camera + the plastic pieces for the sensors + blue tab remove to expose the adhesive. It allow no need to be moved from your old screen over
Tips: moderately curved the metal plate on the screen when lock screws, it can avoid the flex cable pressed to back light too tight. otherwise it can appear dark in some part of the screen
Quality Guarantee: All screens are full tested and 100% in good condition before shipping. We are responsible for any damage during transit or quality problem.contact us if any need

Brand

Color

,

Manufacturer